Aftermarket Components
Aftermarket parts from builders we work with, sold alongside our own billet components. Seat deletes, x-braces and more for the S197 Mustang, shipped from Sacramento. Each listing carries the builder’s own fitment and manufacturing details, so read the page before you order.
Two-layer Cobra hood prop, machined and finished in California. Holds your hood open with attitude — pick the cobra, the wordmark, and the two colors, then build it right here.
Two-piece billet aluminum, silhouette over a contrasting cutout layer
24" tall x 15" wide
Mounting hardware included
Classic or Modern cobra
Custom wordmark, positionable at mid or bottom
Made to order in the USA
Use the configurator below to pick your style, colors, and engraving and see a live preview of your build. Standard color-and-style combinations check out instantly; fully custom artwork or color requests are quoted by email so we get every detail right before a single piece is cut.
Every detail of a well-built engine bay tells a story. The Custom Billet Fuse Box Cover transforms one of the most overlooked areas under the hood into a standout feature — without cutting, drilling, or any permanent modifications to your car.
Now available for two fitments: 1999–2004 and 2010–2014 Mustangs. The billet-style cover installs directly over your existing OEM fuse box cover, retaining full functionality while adding a level of custom detail that sets your engine bay apart. Fiber laser engraved with crisp, permanent detail, it’s a clean, aggressive upgrade that looks right at home alongside your billet caps and other engine-bay accessories.
Design it your way: use the live configurator above to pick your model year, preview an engraving design, and add it straight to your cart.
Prefer your own text or a one-off design? Choose Text Only or Custom Design in the configurator and it will open a pre-filled build request to our team.
Have a custom design in mind? Submit your idea to info@dbcousa.com — we’ll bring it to life.
Specs: billet construction · satin black powder coat · fiber laser engraved · slip-over fit, no cutting or drilling · designed & machined in California, USA.
Flatline coil covers bring a clean, smooth-face billet look to the 4.6/5.4 DOHC Mustang engine bay — no ribs, just a flat machined face you make your own. Each pair is CNC-cut from 6061 aluminum and finished in California.
Build yours with the configurator above: pick your body, accent-dot, and lettering colors independently from the 33-color paint-code palette, Black, or raw machined, with optional paint infill. Choose a wordmark — Powered By Ford, Powered By SVT, Cobra, Mach 1, Bullitt, Terminator, Shelby, or GT500 — or supply your own text, and add laser-engraved cobra or logo art on the flanks.
Text Style: Slim runs the wordmark full-length across the plate; Normal centers it larger and allows flank engraving. Custom text, custom colors, a top line, or any engraving make it a made-to-order build — submit those through the configurator's email request for a quote.
Fitment: 1999–2014 Mustang Cobra, 2000 Cobra R, 2003–2004 Cobra, 2003–2004 Mach 1, and 2007–2014 Shelby GT500. Sold as a pair.
Add your Build ID from the configurator to the order notes / Build ID field so we machine the exact build you configured.
Your engine bay. Your build. Your name on it.
The Classic Custom Billet Coil Cover is machined from solid billet aluminum and finished exactly the way you spec it in our live configurator. Pick a pre-styled wordmark — TRINITY, TERMINATOR, COBRA, GT500, or SHELBY — run it blank, go full Patriot, or machine your own custom text into the face.
Every cover is finished in three independent zones. The body, rim, and lettering can each be done in any factory paint code, black powder coat, raw billet, or a fully custom color — so your covers can match your paint, contrast it, or disappear into a murdered-out bay. Want more? Add laser engraving flanking the wordmark, etched straight into the aluminum with a raw machined finish that never fades, peels, or flakes.
Use the configurator on this page to build yours and see a live photo-accurate preview before you order. Standard builds check out right here; fully custom requests go straight to our inbox for a quick quote.
Price is per set
Have a custom design in mind? Use the configurator below and submit your idea to info@dbcousa.com we'll bring it to life.
The engine bay is part of the build too. This Custom Billet Oil Cap is a precision CNC-machined upgrade built on a genuine Motorcraft EC743 OEM cap — delivering factory reliability with a level of detail that turns heads at every show and every hood pop.
Machined from 6061 billet aluminum and finished in a durable satin black powder coat, the cap is built to withstand the heat and demands of daily driving and performance builds alike. Each cap is fiber laser engraved with crisp, permanent detail that adds depth and contrast right where it counts. The billet cover is then professionally press-fitted onto an authentic Motorcraft EC743 clicker-style cap, ensuring proper alignment, sealing, and OEM-level functionality across 3,000+ Ford, Lincoln, and Mercury platform applications.
A small upgrade with a big impact — exactly the kind of detail that separates a good build from a great one.
Have a custom design in mind? Submit your idea to info@dbcousa.com we'll bring it to life.
The Rounded Billet Coil Covers are the exact ones I have on my GT500, I love the simplicity, paint filled lettering and clean lines of these covers. The Rounded Billet Coil Covers are a premium CNC-machined upgrade designed specifically for Ford SVT applications, transforming one of the most visible areas of the engine bay into a polished, show-quality statement.
The Rounded Custom Billet Coil Cover is machined from solid 6061 aluminum with a fully radiused profile, a machined rim groove, and your choice of finish on every surface — designed and made in California, USA.
Build yours in the configurator below. Choose a body color and rim color from the full paint-code range — Grabber Blue, Race Red, Kona Blue, Highland Green and 30 more 99–14 colors — or keep it classic in matte, semi-matte, or super-matte black powder coat, or raw brushed billet. Wordmark styles are machined into the face and can be left raw or finished with paint infill to match or contrast your body color. Add optional laser-engraved cobra snakes (facing inward or outward) or SVT script flanking the lettering — engravings are a raw laser finish. Choose a smooth perimeter or a raised scalloped edge — the scalloped edge can be finished in any paint code, black powder coat, or left raw billet, at no extra cost. Standard builds check out instantly; custom text, artwork, and custom colors are quoted byemail with your build spec prefilled.
Pair with our Billet Oil Fill Cap and Coolant Reservoir Caps
Features:
Precision CNC-machined 6061-T6 billet aluminum construction
Durable powder coat finish
Fully customizable — finish, colors and lettering to your spec
Designed specifically for Ford SVT applications
Includes driver and passenger side covers
Made to order
Price is per set
Have a custom design in mind? Use the configurator below and submit your idea to info@dbcousa.com we'll bring it to life.
The Original Custom Billet Coil Covers — Built Your Way
The OG Coil Cover is a classic finned design machined from solid 6061 billet aluminum, made to dress up any 1999–2014 Mustang modular V8 engine bay. Raised ribs, deep-machined lettering, and a powder coat finish that holds up to real engine bay heat. Designed and made in California, this is the piece people lean in to look at when the hood goes up.
Every pair is built to order in your combination. Run the classic POWERED BY FORD or POWERED BY SVT, keep it clean with ribs only, or go fully custom with your own text or artwork. Choose your base, rib, and lettering colors independently — factory paint codes like Race Red, Kona Blue, and Grabber Blue, three black sheens, raw machined billet, or any custom color you can name. Want the SVT in red and everything else murdered out? Done.
Use the configurator on this page to build yours and see a live photo-accurate preview before you order. Standard builds check out right here; fully custom requests go straight to our inbox for a quick quote.
Have a custom design in mind?Use the configurator below and submit your idea to info@dbcousa.com we'll bring it to life.
Dress up your Coyote 5.0 engine bay with a pair of fully custom billet aluminum coil covers, machined and finished in-house by Driven Build Co. Each cover is cut from solid 6061-T6 aircraft-grade billet — no cast pot metal, no flimsy plastic — for a dead-flat, OEM-precise fit over your coil packs and a finish that holds up to real underhood heat.
This isn't an off-the-shelf part. Using our online configurator you build the exact look you want before you order: choose your wordmark style — COYOTE, MACH 1, GODZILLA, or BOSS 302 — or run them blank for a clean, understated look. Add your own custom machined text, or send us your own artwork for a one-off set that's yours alone.
Color is just as personal. Both the cover body and the machined lettering can be finished in any of 33 factory colors matched to your paint code — Grabber Blue, Race Red, Competition Orange, Gotta Have It Green, Kona Blue, Deep Impact Blue, Ingot Silver, and more — plus satin, matte, and gloss black powder coat, or left as raw machined billet for that bare-aluminum look. Want a howling Coyote head laser-engraved alongside your wordmark? That’s a one-click option too.
Use the configurator below to pick your style, colors, and engraving and see a live preview of your build. Standard color-and-style combinations check out instantly; fully custom artwork or color requests are quoted by email so we get every detail right before a single chip is cut.
Your engine bay. Your build. Your name on it.
The factory brake and clutch reservoir caps are an afterthought in plastic. These aren't. Machined from solid billet aluminum and finished in a durable black powder coat, each cap is built to outlast the car — and you decide exactly how it looks before it ships.
Use the builder above to lay out your engraving: choose a Classic Cobra or Modern Cobra (facing your way), SVT, Trinity, Coyote, or Boss 302 — add your own line of text, or leave them blank for a clean machined face. The laser cuts crisp and clean, exposing the raw aluminum beneath the black coating for a sharp, high-contrast finish that won't fade, peel, or wash off.
From $79.99 per cap · $89.99 laser engraved · matched set of two from $145. Have something different in mind? Pick Custom Design in the builder or send your idea to info@dbcousa.com and we'll bring it to life.
Build yours below and finish the bay the way it should've left the factory.
Finishing the bay? Our billet shock tower caps cover the strut hardware on 07-14 GT500s.
Layered 1/4" Steel Cobra Sign — Garage, Shop & Man Cave Decor
Mount a striking cobra on your wall. Each piece is built from two laser-cut steel layers — a 1/8" stenciled cobra face over a 1/8" solid silhouette — stacked for a full 1/4" of real depth and a true shadow-box effect. The cut-through stencil lets the backing color show through the snake's scales, hood pattern, and bared fangs, so the piece reads sharp from across the room and rewards a closer look.
Hand-finished and made to order in California, USA this is heavy-gauge metal wall art built to last indoors or in a covered shop — not a thin stamped decal. A perfect centerpiece for a Mustang or muscle-car garage, home bar, office, or game room, and a standout gift for any cobra and performance-car enthusiast.
Make it yours:
Two styles — Classic cobra or the more aggressive Modern cobra
Left- or right-facing to suit your wall and layout
Two sizes — 24" tall × 15" wide, or 18" tall × 11" wide
Finish your way — Powder coat in your choice of color, or natural Raw steel
Two-tone freedom — match the cobra and backing, run raw, or go fully custom (e.g. red-on-black, blue-on-graphite)
Backing optional — order the single-layer stencil alone for a lighter, lower-profile look
Upgrade your interior with a shift knob that's as refined as your build. Precision-machined from billet aluminum and laser engraved right here in the USA, this custom shift knob is designed specifically for the S197 Mustang and delivers a look and feel that no factory part can match.
Choose from six standard engraving designs or submit your own idea for a completely custom piece. Pair your design with your choice of base color — black, red, silver, or blue — for a finished product that's uniquely yours. Every knob ships with standard 10 x 1.25" threads, with alternate thread pitch sizes available upon request.
Whether you're a Shelby enthusiast, a dedicated Mustang owner, or simply someone who appreciates the details, this is the kind of upgrade that gets noticed every time you get behind the wheel.
Specific to the TR6060 Transmission in the GT500 with reverse right up pattern. If you’re looking for the MT82 reverse left up click here.
Have a custom design in mind? Submit your idea to info@dbcousa.com we'll bring it to life.
Upgrade your interior with a shift knob that's as refined as your build. Precision-machined from billet aluminum and laser engraved right here in the USA, this custom shift knob is designed specifically for the S197 Mustang and delivers a look and feel that no factory part can match.
Choose from six standard engraving designs or submit your own idea for a completely custom piece. Pair your design with your choice of base color — black, red, silver, or blue — for a finished product that's uniquely yours. Every knob ships with standard 12 x 1.25" threads, with alternate thread pitch sizes available upon request.
Whether you're a Shelby enthusiast, a dedicated Mustang owner, or simply someone who appreciates the details, this is the kind of upgrade that gets noticed every time you get behind the wheel.
Specific to the MT82 Transmission with reverse left up pattern. If you’re looking for the TR6060 transmission in the GT500 with reverse right up click here.
Have a custom design in mind? Submit your idea to info@dbcousa.com we'll bring it to life.
One-of-a-Kind Seat Delete Kit for Your Mustang
Add a seat delete t-shirt and get an automatic 50% discount on the shirt!
Custom logos and text can be engraved or cutout of the back or bottom. Examples: Mustang, BOSS 302, your logo or text. More sample pictures below (some pictures are of different year Mustangs). Option for hand painting available for a more personalized touch.
Please email us here regarding the details and send any vector logos, fonts, color choices, etc. Complicated designs may cost extra if you don't have vector files. Custom items usually take 5-10 business days to complete.
Want vinyl wrap instead of engraving? Please email us.
By removing weight, you can go quicker, so remove up to 30 pounds with this custom engraved S197 Mustang rear seat delete kit. A must for anyone who wants to get every bit of performance and style out of their Mustang.
Click to check out Modern Muscle Performance's review of the S197 seat delete.
Made in the USA from tough lightweight ABS plastic (NOT thin fragile plywood) and designed to fit like an OEM product. Bottom can handle much more weight than the competition without deforming thanks to 5 mounting points and better material. Precision machined for a great fitting high quality product.Simple Slip-On and Bolt-In Installation.
No need to cut anything or remove seat brackets, seat belts or interior plastic. Easy to follow step-by-step instruction video. Can be easily modified to fit roll cages, nitrous systems and most other custom setups requiring pass-through or location in the back seat. Application. Custom designed for 2005-2014 Ford Mustang GT, V6 and Shelby Fastbacks (coupes). Does not fit convertibles. All engravings, cutouts and vinyl wraps are customer fan art and not normal production parts. All custom made per customer request.
Rated the Best Mustang Seat Delete Kit
• Drop Weight. Remove up to 30 pounds with this Mustang rear seat delete kit
• USA-made, precision-machined seat delete ensures durability and perfect fit
• Pre-drilled holes and included screws allow for secure, simple installation
• Easily return to stock - no permanent modifications or cutting
By removing weight, you can go quicker, so remove up to 30 pounds with this S197 Mustang rear seat delete kit. A must for anyone who wants to get every bit of performance out of their Mustang.
Click to check out Modern Muscle Performance's review of our S197 seat delete.
Want a personalized seat delete? Click here
Checkout the EMP Seat Delete T-shirts here
Made in the USA from tough lightweight ABS plastic (NOT thin fragile plywood) and designed to fit like an OEM product. bottom can handle more weight than the competition without deforming thanks to three bolt mounting points and better material. Precision machined for a great fitting high quality product.
Engraved/Cutout: Custom logos and text can be engraved or cutout of the back or bottom.Examples: Mustang, Coyote, Boss 302, your logo or text. We will contact you regarding the details and total cost if you choose the Engraved/Cutout option.
Simple Slip-On and Bolt-In Installation. No need to cut anything or remove seat belts or interior plastic. Easy to follow step-by-step instruction video. Can be easily modified to fit roll cages, nitrous systems and most other custom setups requiring pass through or location in the back seat.
Application: Custom designed for 2005-2014 Ford Mustang GT, V6 and Shelby Fastbacks (coupes). Does not fit convertibles.
• Custom Made for all 2005-2014 S197 Gen 5 Mustang models (Fits coupes - will not fit convertibles). 2005 Mustang, 2006 Mustang, 2007 Mustang, 2008 Mustang, 2009 Mustang, 2010 Mustang, 2011 Mustang, 2012 Mustang, 2013 Mustang, 2014 Mustang - Mustang GT, Mustang V6, Shelby GT Mustang, GT500 Mustang, Boss 302 Mustang
X-BRACE NOT INCLUDED. Click here to see Steeda X-Brace page.
If you have, or want to buy the Steeda Mustang Rear Seat Chassis X-Brace, this S197 Mustang rear seat delete kit is a must have. Custom made for a perfect fit with the Steeda X-Brace.
Specially made for those who want to get every bit of performance out of their Mustang while looking great.
Click to check out Modern Muscle Performance's review of our S197 seat delete.
Check out our Seat Delete T-ShirtsHERE
Made in the USA from tough lightweight HDPE plastic (NOT thin fragile plywood) and designed to fit like an OEM product. Bottom can handle more weight than the competition without deforming thanks to three bolt mounting points and better material. Precision machined for a great fitting high quality product.
Engraved Center Plate Option: Custom logos and text can be engraved into an HDPE center plate that mounts directly to the X-brace. Examples: Mustang, Coyote, Boss 302, your logo or text. Can choose the option to have the engraving painted too. Email your design idea to info@dbcousa.com once you place the order.
Simple Slip-On and Bolt-In Installation. No need to cut anything or remove seat belts or interior plastic. Easy to follow step-by-step instruction video.
Application. Custom designed for 2005-2014 Ford Mustang GT, V6 and Shelby Fastbacks (coupes). Does not fit convertibles.